Finns nu att ladda ner här..
http://www.4shared.com/dir/1796154/f4cc7649/sharing.html
Från Read Me-filen..
===========================================================================
PENTAX K10D Firmware Updating to Version 1.10
===========================================================================
* Firmware is the software that runs inside digital cameras.
Updatable models
K10D digital SLR cameras running Firmware Ver. 1.00
How to check version
Turn the power on while pressing the MENU button.
The Firmware version is displayed for about 5 seconds at the center
of the LCD monitor.
Perform the above operation without inserting the SD card containing
Firmware in the camera.
* * * * * * * * * * * * * * * * [Caution] * * * * * * * * * * * * * * * * *
Be sure to use fully charged battery (DLI-50)
If the camera turns off during updating due to lack of battery power, the
camera will become inoperable. If this happens, a charge will be made for
repairs even if within the warranty period.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Updating Procedure
1. Provide a formated SD memory card for the update software (with at least
16MB of available memory space).
The downloaded file is self-extracting.
The following files are extracted.
readme.txt : this document
fwdc162b.bin : Firmware
Copy the above Firmware file [fwdc162b.bin] to the root directory in
the SD card.
If your computer does not have a card slot, you can copy the firmware
update file by inserting the SD card into your camera and then connecting
the camera directly to your computer.
2. If the camera power is on, turn it off.
3. Insert the update SD card (prepared in step 1) into the camera and close
card cover.
4. Turn the camera power on while pressing the MENU button.
5. "NOW LOADING" appears in the LCD monitor, and will change to the
"PROGRAM UPDATE". At the bottom of the LCD monitor,
CURRENT VERSION 1.00
UPDATE VERSION 1.10
will be displayed.
6. Press the four-way controller to select "YES" and press the "OK" button.
7. "UPDATING" appears on the LCD monitor and updating starts.
Please do not under any circumstances switch off the power before the
update is completed.
It will take approximately 90 seconds to complete update.
8. When update is completed, the "COMPLETE" will be displayed at the left
bottom of the LCD monitor, then turn the camera off.
9. Remove the update SD card from the camera.
10. To check the Firmware version in your camera, turn the camera on while
pressing the MENU button.
Check that the version displayed in the LCD monitor is 1.10.
The camera automatically starts up after about 5 seconds.
(Caution)
When updating is finished, the update SD card still contains the
Firmware file.
If you want to use this card to take pictures, delete the Firmware file
first.
PENTAX Corporation
